Several Tips For Removing Burrs On Metal Stamping Parts

a: There are tools to remove burrs from metal stamping parts

1. Hole: Use a chamfering knife or the front end of a drill with a larger diameter to remove burrs from the holes of the metal stamping parts.

2. Edge: Use files, whetstone, sandpaper, whetstone.

3. Welding slag: There are vibration slag removal tools can also remove brittle burrs.

4. Outer diameter: In the metal stamping process, the angle is guided by a lathe.

b. Manually remove burrs on metal stamping parts

1. Deburring by electrochemistry: If you make your own equipment, the cost is not high, it is economical, efficient and used.

2. Heat-treated parts can also be deburred by shot blasting, and surface stress can also be eliminated.

3. It has better deburring effect and high efficiency with an air gun equipped with various shapes of gun tips.

4. Vibration grinding to remove burrs (gear burrs), with high efficiency and good quality.