Aside From The Brand, How To Choose A Good Switch Socket in Essence?

1. Panel material: At present, the panel materials on the market are mostly PC, ABS, and nylon 66 materials; PC materials have good fire resistance and flame retardancy, and are safer to use.

Selection tips: How to distinguish ABS material from PC material:

ABS material is flammable, prone to yellowing in light, brittle and other defects, and may be broken if you break it hard.

The PC material has good toughness, and the outer frame or panel is removed, and it can be bent at will without being brittle.

2. Fixing frame; the fixing frame is generally made of steel and PC. The steel has high strength but also has high requirements on the wall and wiring. It is recommended to choose the PC material.

3. Hardware and terminals

Determines the service life of the socket, the number of times of plugging and unplugging, whether it falls off when plugged in, and whether it is easy to burn out.

Choose a tip:

1) Brass is relatively soft (easy to burn, not plugged tightly, easy to fall off)

Tin Phosphor Bronze (significantly improved oxidation resistance, significantly improved hardness and toughness)

2) Choose from the thickness of the material, the general thickness is 0.4mm, and the better one is 0.7mm thick. In practice, the heavier the socket, the better the quality!

3) From the terminal form, be sure to choose the pull button type instead of the top button type. The pull button is more wrapping, not easy to be disconnected, and can support multiple strands and be connected to the socket, which is more practical.