Products
-
Metal Box stamping die
Mold Material: P20, 718HH, S136, CR12MOV
Key point on quality of product: outside finishing
Short description: it is mainly for switch, socket, extension socket, D.B, wiring box -
Lamp Holder Injection Mold
Mold Material: H13 HRC48-50 Cavity number: 8 cavity or 4 cavity if it comes with sliding
Key point on quality of product: thread size tolerance, full circle thread
Short... -
Holder with Thread Injection Mold
Mold Material: HRC48 H13;
Key point on quality of product: injection gate. We also should consider the raw material grade. As if some times the real injection material is 2nd grade PA or... -
E27 Injection Mold
Mold Material: s136 Sweden
Key point on quality of product: this model is mainly used for E27 lamp holder item. For product material, it is key for start this mold. Also the market... -
B22 Injection Mold
Mold Material: H13
Key point on quality of product: the design is as per customers requirement. If the engineer team is soft & not stronger. We will have product and waste material... -
Wiring Device Injection Mold
Mold Material: H13, S136, 718H, 1.2836. P20
Key point on quality of product: most material in ABS, PC for wiring device. The surface must be good shinning -
Brass Plug Pin
Material: brass pin, H58, H62, Cu56Zn38Pb3
Key point on quality: thread strength, hole size and key length
Short description: it is mainly for plug, adaptor ... -
Brass Terminal Blocks
Material: brass, H58-3,
Key point on quality: true size, good finishing and thread
Short description: connector for wire
Specification: as per customers drawing or design -
Brass Electrical Component
Material: Brass
Key point on quality: shape size, thread and surface finishing
Short description: it is mainly for connector part f electrical items.
Specification: it... -
Brass Electrical Pins
Material: Brass
Key point on quality: thread finishing status and outside shape
Short description: 13A plug, 15A plug, 5A plug, they are from solid brass part, not empty... -
Copper Electrical Components
Material: copper H62, H58
Key point on quality: Size and finishing surface and welding situation on copper part
Short description: it is for connection part & moving part. ... -
Socket Part
Material: Brass or brass fixed with copper material
Key point on quality: The fixing strength
Short description: To improve the complete grade of product. If normal one, the...